Main content

ND header pumpdosierer
You get all of our anaerobic liquid plastics in the new pump dosing.
 ND pumpdosierer  

Never blocked tubes again …
Never residue in bottles and tubes again …

  • Easy dispensing
  • No dripping or subsequent seeping
  • Highly viscose sealants are applied with ease and without problems
  • Enables precise metered dispensing

 

 ND display pumpdosierer

 

  Each display with 12 x 15 g or 50 g dispensers – clearly arranged and customer-friendly.

ND header mrg

MARSTON-DOMSEL pipe thread seals with and without PTFE secure and seal threads against gas, water, hydrocarbons, oil, liquid gas and many chemicals.

  •     Replaces hemp, Teflon and also solid seals
  •     Parts can be aligned directly after assembly
  •     High-quality seal
  •     Additional protection against corrosion
  •     Temperature resistant from 150°C to 200°C
  •     DVGW approval

Areas of application:
The shipbuilding industry, pump construction, sanitary applications, tractor construction, the motor and electrical industries, turbines and nuclear power stations, engineering and gear manufacture, the foodstuffs industry, mining, gas, water and electricity works etc.

Areas of application:
With 670, 675 and 698, pre-treat the surface with MD Activator No. 11 when working below 5°C. All parts must be clean, dry and dust-free - clan them beforehand with Marston Cleaner.

MD MRG.666.620 DVGW release

medium viscosity - high strength - heavy demountable
Universally applicable up to M56 (2'') | Gap-filling capacity: up to 0.25 mm | Fixture time: 20-40 minutes
Functional hardness: 6-12 hours | Temperature resistant: -55°C to +200°C | Color: green

MD MRG.670.542

low viscosity - medium strength - demountable
Universally applicable up to M20 | Gap-filling capacity: up to 0.15 mm | Fixture time: 10-20 minutes
Functional hardness: 1-3 hours | Temperature resistant: -55°C to +150°C | Color: brown

MD MRG.675.577 DVGW release

high viscosity - medium strength - demountable
For threads up to M80 (3") | Gap-filling capacity: up to 0.5 mm | Fixture time: 10-30 minutes
Functional hardness: 1-3 hours | Temperature resistant: -55°C to +150°C | Color: yellow

MD MRG.6750K.5770 Anaerobics without hazard symbols and without risk- and safety phrases

high viscous - medium strength - removable
Fot threads up to M80 (3”) | Gap-filling: 0,5 mm | Fixture time: 15-30 minutes | Functional hardness: 1 - 3 hours
Viscosity: approx. 20.000-80.000 mPa.s  | Temperature resistance: -55°C bis +150°C | Thixotropic

MD MRG.676 Special thread seal

Replaces hemp, teflon seals and fixed
For threads up to M56 (2") | Gap-filling capacity: up to 0.3 mm | Fixture time 15-30 minutes
Functional hardness 1-3 hours | Temperature resistant: -55°C to +180°C | Color: blue

For locking and sealing of screw threads to gas, water, hydrocarbon, oil, LPG and chemical products.

MD MRG.678.511 DVGW release

medium viscosity - low strength - easy demountable
For threads up to M80 (3") | Gap-filling capacity: up to 0.3 mm | Fixture time: 20-40 minutes
Functional hardness: 1-3 hours | Temperature resistant: -55°C to +150°C | Color: white

Packaging:
bottles 10 g unit 12 pcs. | bottles 50 g unit 12 pcs. | bottle 250 g unit 6 pcs. | pump dispenser 15 g unit 12 pcs.
pump dispenser 50 g unit 12 pcs.| tube 50 g unit 10 pcs.| tube 100 g unit 10 pcs. | tube 250 g unit 12 pcs.

ND header mssx

MD Srcew Retention is an extremely rapid anaerobic liqiud synthetic which cures on contact with metals without oxygen.
Screw retention replaces conventional fixing methods such as cotters, lock washers and discs. The screw retention secures screws, nuts and stud bolts against loosening due to vibrations and seals at the same time. MARSTON-DOMSEL systems are functionally reliable even under the toughest conditions.
  • High strengths
  • High temperature resistance (up to 230°C)
  • time and cost savings
  • very short hardening times
  • high functional reliability
  • DVGW

Areas of application:
Motor racing, engine construction, the automotive and motorcycle industries, tractor construction, the electrical industry, turbines and nuclear power stations, engineering, the lighting industry, transmission construction, the foodstuffs industry, gas and waterworks, pump construction, sanitary applications etc.

Application instructions:
Treat threaded parts with MD quick cleaner before applying screw retention adhesive. Pre-treat the surfaces with MD Activator No. 11 when working at temperatures below 5°C. Remove cutting oil and washing lye residues with hot water. Use MD MGL.BS or similar for plastic parts.

MD MSS.520.290

low viscosity- high strength- heavy demountable
For all screws with fine threads up to M5 | Fixture time: 10 - 20 minutes | color: green
For recommended for the retroactive securing of bolts and screws. Capillary effect.

MD MSS.541.241

low viscosity - medium strength - demountable
For all screws with threads up to M12 | Fixture time: 10-20 minutes | Color: blue

MD MSS.550.222

medium viscosity - low strength - easy demountable
For all screws with threads up to M24 | Fixture time: 15 - 30 minutes | color: purpur
Can be loosened again with normal tools. Suitable for adjusting screws, screws on maintenance openings and carburettor screws. For use on metals which may break during disassembly.

MD MSS.581.242

high viscosity - medium strength- demountable
For all screws with threads up to M24 | Fixture time: 10-20 minutes | Color: blue

MD MSS.585.243 DVGW release | NSF release

high viscosity - medium strength - demountable
For all screws with rough threads up to M36 | Fixture time: 10 - 20 minutes | Color: dark blue
For all metal threaded connections. Prevents breaking off due to vibration on drives, motors etc. Slightly oil-tolerant. The bond can be loosened again with normal tools.

MD MSS.5850.2400K Anaerobics without hazard symbols and without risk- and safety phrases

medium strength - high viscosity
For all screws with coarse threads up to M36 | Curing time-handling: 30-50 minutes  | Curing time-functional: 6-12 hours
Gap filling: 0,25 mm | Viscosity: approx. 2.500 - 4.500 mPa.s | Temperature resistance: -55°C bis +150°C

MD MSS.587.245

high viscosity - medium strength - demountable
For rough threads up to M80 (3") | Fixture time: 15-30 minutes | Color: blue

MD MSS.641.270/1

medium viscosity - high strength - heavy demountable
For all screws with threads up tos M20 | Fixture time: 10 - 20 minutes| Color: green
for all metal threaded connections including passive materials such as high-alloy steel. For highly vibration-and shock-resistant threaded connections e.g. studs on engines or pumps etc.

MD MSS.6410.2700K Anaerobics without hazard symbols and without risk- and safety phrases

high strength - medium viscosity
For all screws with coarse threads up to M20 | Curing time-handling: 20-40 minutes | Curing time-functional: 6-12 hours
Gap filling: 0,15 mm | Viscosity: approx. 550 - 850 mPa.s | Temperature resistance: -55°C bis +150°C

MD MSS.642.272 DVGW release

high viscosity - high strength - heavy demountable
For all screws with threads up to M30 | Fixture time: 20-40 minutes | Color: red

MD MSS.681.262 NSF release

high viscosity - high strength - heavy demountable
For all screws with rough threads up to M36 | Fixture time: 10-15 minutes | Color: red

Packaging:
bottles 10 g unit 12 Pcs. | bottle 50 g unit 12 Pcs. | bottle 250 g unit 6 Pcs. | pump dispenser 15 g unit 12 Pcs.
pump dispenser 50 g unit 12 Pcs.

ND header mbl

Bearings/bushings/shafts/hubs

An anaerobic liquid plastic that hardens on contact with metals in the absence of oxygen.

  • Rapid hardening
  • Resistant to many media
  • Very high strength, even on slightly oily bonded parts
  • Low viscosity with excellent capillary action
  • Medium and high viscosity for bearings and bushings

Bushing and bearing retention of Marston-Domsel is ideal for mounting of bearings on shafts and into bearing housings.

Applications:
Automobile and motorcycle industry, shipping industry, motors and electronics industries, machinery and gear etc.

MD MBL.610.603

low viscosity - high strength - heavy demountable
Gap-filling 0,1 mm | fixture time: 6 - 10 hours | fully hardened: 1 - 3 hours | color: green

MD MBL.630.641

medium viscosity - medium strength - demountable
Gap-filling 0,12 mm | fixture time: 10 - 20 minutes | fully hardened: 1 - 3 hours | color: yellow

MD MBL.650.648

low viscosity - high strength - heavy demountable
Gap-filling 0,15 mm | fixture time: 2 - 5 minutes | fully hardened: 1 - 3 hours | color: dark green

MD MBL.665.620

high viscosity - high strength - heavy demountable
Gap-filling 0,3 mm - fixture time: 20 - 40 minutes - fully hardened: 3 - 6 hours | color: green  

MD MBL.668.660

high viscosity - high strength - heavy demountable
Gap-filling 0,5 mm - fixture time: 15 - 30 minutes - fully hardened: 3 - 6 hours | color: silver  

MD MBL.690.638 NSF release

high viscosity - high strength - heavy demountable
Gap-filling 0,2 mm | fixture time: 2 - 5 minutes | fully hardened: 1 - 3 hours | color: green  

Packaging:
bottles 10 g unit 12 psc. | bottles 50 g unit 10 psc. | bottle 250 g unit 6 psc. | pump dispenser 15 g unit 12 psc. |
pump dispenser 50 g unit 12 psc. | tube 50 g unit 10 psc.