Bearings/bushings/shafts/hubs

An anaerobic liquid plastic that hardens on contact with metals in the absence of oxygen.

• Rapid hardening
• Resistant to many media
• Very high strength, even on slightly oily bonded parts
• Low viscosity with excellent capillary action
• Medium and high viscosity for bearings and bushings

Bushing and bearing retention of Marston-Domsel is ideal for mounting of bearings on shafts and into bearing housings.

Applications:
Automobile and motorcycle industry, shipping industry, motors and electronics industries, machinery and gear etc.

MD MBL.610.603

low viscosity - high strength - heavy demountable
Gap-filling 0,1 mm | fixture time: 6 - 10 hours | fully hardened: 1 - 3 hours | color: green

MD MBL.630.641

medium viscosity - medium strength - demountable
Gap-filling 0,12 mm | fixture time: 10 - 20 minutes | fully hardened: 1 - 3 hours | color: yellow

MD MBL.650.648

low viscosity - high strength - heavy demountable
Gap-filling 0,15 mm | fixture time: 2 - 5 minutes | fully hardened: 1 - 3 hours | color: dark green

MD MBL.665.620

high viscosity - high strength - heavy demountable
Gap-filling 0,3 mm - fixture time: 20 - 40 minutes - fully hardened: 3 - 6 hours | color: green  

MD MBL.668.660

high viscosity - high strength - heavy demountable
Gap-filling 0,5 mm - fixture time: 15 - 30 minutes - fully hardened: 3 - 6 hours | color: silver  

MD MBL.690.638 NSF release

high viscosity - high strength - heavy demountable
Gap-filling 0,2 mm | fixture time: 2 - 5 minutes | fully hardened: 1 - 3 hours | color: green