Main content

Epoxy resin repair kit

MD-Mix repairs incorrectly drilled holes, cracks and broken threads on metal, wood and plastic.

  •     Fills cracks and holes
  •     Temperature resistant up to +180°C and up to +300°C
  •     for short periods
  •     For on-the-spot repairs

MD-mix is easy to use. The material is worked like plasticine. MD-mix has an extremely high Shore hardness D of 80 (concrete 60). MD-mix can be worked mechanically.

 ND mix metall
 

MD MIX Steel

Epoxy resin - Metal-filled. For quick repairs to stripped threads, pumps, housings, tanks and containers, hard plastic and stone.

MD MIX Aluminium

Epoxy resin - Aluminium-filled. For quick repairs to transmission housings, boat and professionalengine-building.

Packaging unit
MD-mix 56 g unit 24
MD-mix 115 g unit 12

MD MIX Wood

Epoxy resin - Mineral-filled. For quick repairs to wood in for example furniture, gluing hinges, repairing boreholes, retaining screws. Remains slightly flexible.

 
  ND mix k w h

MD MIX Copper

Epoxy resin - Copper-filled. For quick repairs to pipes and pipe elbows, hot and cold water pipes, copper guttering and sheets, water tanks and flanges.

MD MIX Water

Epoxy resin - Ceramically-filled. For quick repairs to sanitary facilities, swimming pools, radiators, glass, ceramics, stone and hard PVC.

 
Working instructions:
The parts to be repaired have to be clean and free of oil and grease. Roughening increases the strength of the bond. Cut off the required quantity of MD MIX and knead it for approximately 2 minutes until an even color has been produced and the material becomes warm. Then apply MD MIX to the parts and mould it. Mechanical working can be done after approximately 20 minutes. Final hardening occurs after 24 hours. Do not work at outdoor temperatures below 5°C.
Application examples:
Repairing incorrectly drilled boreholes, holes in pipes, cavities and all cracks in metal, wood and plastic. Mechanical working is possible after a short time. Parts can be ground, milled, bored and painted over.