Main content

MD POX

ND header pox

Two-component epoxy resin adhesive

MD-pox is a very reactive chemical compound. After mixing, the two-component adhesive achieves extraordinary strength. For bonding metals, ceramics, glass, stone and many hard plastics. For many on-the-spot repairs with high quality and little effort. Easy handling thanks to the automatically regulated two-nozzle system.
  • Achieves extremely high strength
  • Universally applicable
  • Weatherproof
  • Hardening in 5 or 30 minutes
  • Also suitable as a casting compound
  • Working life: available in 5 or in 30 minutes
  • MD-pox remains stiffly flexible and can therefore guarantee permanent rigidity in case of impacts or vibration.

POX 5 minutes

ND pox 5min

Processing information:
The bonding surfaces must be clean, oil and grease free (e.g. with Marston Cleaner). Excellent results are obtained by a mechanical roughening of the adhesion surfaces. (Insert the cartridge into the dispensing gun and then close only 50 g, 400 g.) Twist off cap, attach and tighten the mixing nozzle. Push the material out (with the dispensing gun 50 g, 400 g) and discard the first 2 g, as they are not yet mixed at 1:1. Setting time can be curtailed at high temperatures. Join work pieces together and fix. Store opened cartridge in a cool, dry place.

POX 30 minutes

ND pox 30min

MD POX 5 minutes
Packaging:
Art.-No. MPO.S25 unit 10 dual injektion á 25 g | Art.-No. MPO.S25 unit 8 dual injektion á 25 g, blister card
Art.-No. MPO.S50 unit 12 double cartridge for pistole á 50 g | Art.-No. MPO.S400 unit 6 double cartridge for pistole á 400 g

MD POX 30 minutes
Packaging:
Art.-No. MPO.L.S25 unit 10 dual injektion á 25 g | Art.-No. MPO.L.S50 unit 12 double cartridge for pistole á 50 g
Art.-No. MPO.L.S400 unit 6 double cartridge for pistole á 400 g

MD PU Speed

ND header pu

PU SPEED 1 min.

ND pu 1min

Two-Component Instant Adhesive


MD PU SPEED is a two-component instant adhesive. The mixing ratio is regulated automatically.

  •     Bonds many materials in a very short time
  •     Reaches extremely high strength in a very short time
  •     Repairs to plastic parts is possible 

MD PU SPEED is non-drip and weather and ageing-resistant. Reworking such as grinding, drilling and thread-cutting is possible after just a few minutes.

Areas of application:
MD PU SPEED is used for repairing broken plastic parts (thermoplastics and duroplastics), bumpers, bucket seats and roof racks.

 

PU SPEED 5 min.

ND pu 5min

Packaging units

PU SPEED 1 min.
Art.-No. MPU.S25 unit 10 dual injektion á 25 g | Art.-No. MPU.S25-BK unit 8 dual injektion á 25 g, blister card
Art.-No. MPU.S50 unit 12 double cartridge for psitol á 50 g

PU SPEED 5 min.
Art.-No. MPU.L.S25 unit 10 dual injektion á 25 g | Art.-No. MPU.L.S50 unit 12 double cartridge for psitol á 50 g

MD MET

ND header met

Liquid metal epoxy resin base

MD MET liquid metal repairs incorrectly drilled boreholes, cracks and broken threads on metal,
wood and plastic.
  • Fills cracks and holes
  • Universally applicable
  • For on-the-spot repairs

MD MET is easy to apply.
MD MET is high-strength and is temperature-resistant up to 120°C.

Application examples:
Repairing incorrectly drilled boreholes, flaws and all cracks in metal, wood and plastic. Mechanical working is possible after a short time. Parts can be ground, milled, bored and painted over.

Working instructions:
 The bonding surfaces must be clean, oil and grease free (e.g. with Marston Cleaner). Excellent results are obtained by a mechanical roughening of the adhesion surfaces. (50 g Insert the cartridge into the dispensing gun and then close.) Twist off cap, attach and tighten the mixing nozzle. Push the material out 50 g with the dispensing gun) and discard the first 2 g, as they are not yet mixed at 1:1. Setting time can be curtailed at high temperatures. Join work pieces together and fix. Store opened cartridge in a cool, dry place.Mechanical working is possible after 30 minutes. Final hardening occurs after 24 hours. Do not work at outdoor temperatures below 5°C. Replace the closure on the cartridge after use.

 ND met 

Packaging units:
MPO.S25  14 dual injection á 25 g | 8 dual injection á 25 g, blister card
MPO.S50  12 dual injection for pistole á 50 g

MD POLY 1:1/ 10:1

ND header poly
ND mpe.1

MD POLY 1:1

Construction adhesive Polyoletine
Special adhesive for PP, PE, Teflon and silicone. Easy to use. Excellent moisture and chemical resistance. For bonding, sealing and casting of PP, PE, EPDM, and many plastics. Particularly suitable for materials with different coefficients of expansion.

The product is in the ratio 1:1 resin-hardener mixed.

  • Pot life approx 2-3 minutes
  • Hand strength after 7-10 minutes
  • Final strength after 24 hours
  • Temperature resistance approx. -50°C - 120°C

Application instructions:
Insert the cartridge into the gun (50 g). Remove the cap and a small amount of adhesive to express both components flow freely. Attach mixing nozzle and apply adhesive. The bond strength is supported by good treatment. The surface need clean, oil and grease. To accelerate the curing, it is possible to heat local positions for a short time. This is only possible after the fixing time of 5 minutes.
Packaging:
Art.-No. MPE.1.S25 25 g unit 10 pcs. | Art.-No. MPE.1.S50 10:1 50 g unit 12 pcs. 
ND mpe  

MD POLY 10:1

Two-component high-performance adhesives

MD POLY is a structural, two-component, solvent-free special adhesive.
MD POLY has a very good adhesion to difficult to bond surfaces such as PP, PE, PTFE or EPDM. MD POLY has excellent moisture and chemical resistance.

The product is in the ratio 10:1 resin-hardener mixed.

  •     Pot life approx 5 minutes at 25°C
  •     Hand strength after 2 hours
  •     Final strength after 24 hours
  •     Temperature resistance approx. -40°C to + 80°C
  •     Working temperature + 10°C to + 30°C

MD POLY is specially developed for bonding polyolefins and low energy plastics such as PP and PE. A prepara-treatment with primer is not necessary.
Packaging:
Art.-No. MPE.S50 10:1 50 g unit 9 pcs. 

MD MIX

Epoxy resin repair kit

MD-Mix repairs incorrectly drilled holes, cracks and broken threads on metal, wood and plastic.

  •     Fills cracks and holes
  •     Temperature resistant up to +180°C and up to +300°C
  •     for short periods
  •     For on-the-spot repairs

MD-mix is easy to use. The material is worked like plasticine. MD-mix has an extremely high Shore hardness D of 80 (concrete 60). MD-mix can be worked mechanically.
 ND mix metall
 

MD MIX Steel

Epoxy resin - Metal-filled. For quick repairs to stripped threads, pumps, housings, tanks and containers, hard plastic and stone.

MD MIX Aluminium

Epoxy resin - Aluminium-filled. For quick repairs to transmission housings, boat and professionalengine-building.
Packaging unit
MD-mix 56 g unit 24
MD-mix 115 g unit 12

MD MIX Wood

Epoxy resin - Mineral-filled. For quick repairs to wood in for example furniture, gluing hinges, repairing boreholes, retaining screws. Remains slightly flexible.

 
  ND mix k w h

MD MIX Copper

Epoxy resin - Copper-filled. For quick repairs to pipes and pipe elbows, hot and cold water pipes, copper guttering and sheets, water tanks and flanges.

MD MIX Water

Epoxy resin - Ceramically-filled. For quick repairs to sanitary facilities, swimming pools, radiators, glass, ceramics, stone and hard PVC.

 
Working instructions:
The parts to be repaired have to be clean and free of oil and grease. Roughening increases the strength of the bond. Cut off the required quantity of MD MIX and knead it for approximately 2 minutes until an even color has been produced and the material becomes warm. Then apply MD MIX to the parts and mould it. Mechanical working can be done after approximately 20 minutes. Final hardening occurs after 24 hours. Do not work at outdoor temperatures below 5°C.
Application examples:
Repairing incorrectly drilled boreholes, holes in pipes, cavities and all cracks in metal, wood and plastic. Mechanical working is possible after a short time. Parts can be ground, milled, bored and painted over.
  1. MD Mirror adhesive set