Product description:
Marston ceramic adhesive is a flexible two-component epoxy resin adhesive developed especially
for the permanent bonding and coating of surfaces which are exposed to impacts, vibration or bending.

Instructions for use:
Surface preparation: steel or concrete surfaces must be mechanically ground and/or degreased to create a clean and stable material surface which is free of loose rust,
cement slurry, dust etc. Sandblasting, grinding and brushing with a wire brush are acceptable means of rubbing down. New concrete surfaces must first harden for 14-28 days depending on the ambient conditions. Marston ceramic adhesive can be applied to steel or concrete with a solid protective coating. Light sandblasting or treatment
with emery paper then creates the necessary conditions for adhesion. An adhesion test is, however, always recommended.

Mixing and application:
The hardener (A) to adhesive (B) mixing ratio is 1:1 by volume (1:1.68 by weight). An automatic dispenser is recommended for large applications or frequent small applications
to guarantee a precise mixing ratio. The material must be mixed until it takes on an even appearance and is then applied to the appropriate location. The substrate temperature must be at least 3 to 5°C higher than the dew point for the respective ambient temperature and humidity to prevent surface condensation occurring. The application temperature must lie in the range between 5°C and 40°C.

Material consumption:
As the adhesive is solvent-free, the thickness of the damp and dry adhesive is identical. This means that 1 litre of the mixed material at a film thickness of 1 mm is enough for
1 square metre without having to allow for shrinkage etc.

Cleaning:
Surfaces must be clean and free from oil and grease.

Shelf life:
1 year if stored in a dry environment at 20°C - 30°C.

Packaging units:
small: each 1 bucket adhesive 3,75 kg, hardener 2,25 kg
large: each 1 bucket adhesive 7,5 kg, hardener 4,5 kg

Properties:
Ceramic paste based on a highly molecular oil, anorganic binding agents and
ceramic additives. The product can be used as a paste within a range of -20°C
to approx. +150°C. The solid lubricant it contains can be deployed at over 1500°C.
The product contains no metallic pigments and is free of graphite, molybdenum
sulphide and also sulphur-containing additives.

Ceramic paste as a high-pressure and high-temperature lubricant in engineering
for gear wheels, slideways, guide rails and joints mainly with slow sliding move-
ments. Ensures rapid and simple installation and disassembly of things such as
threaded parts. It permits the correct torque to be applied by excluding influences
which are based on thread irregularities.

Areas of application:
For lubrication and for preventing etching on machine components which are
subjected to high temperatures such as bolts, slide bushes, guides, spindles,
springs, wedges etc. Disassembly is made easier. For use as a separating agent
for hot threaded connections, e.g. hot steam bolts, on turbines, exhaust pipes,
gear wheels, valves, chains, slideways and shafts which exist in areas such as
the petrochemical industry, in power stations, milling works etc. For use as a
separating agent in metal casting, pressure casting, forging and extruding if very
high temperatures are reached.

Properties:

High application temperature range from -30°C to +1300°C, optimum dismantling prerequisites even after long periods of time, high pressure resistance, good electrical conductivity, excellent lubricating and separating effect, prevents cauterisation and seizing up of steel components, excellent heat dissipation, sulphur, lead and nickel-free, very low friction coefficient, extremely adhesive, water and corrosion-resistant, excellent separation and lubrication effect, sealing effect against corrosive gases and liquids.

Areas of application:
The automotive and motorcycle industries, tractor construction, the engine and electrical industries, turbines and nuclear power stations, engineering and transmission construction, the foodstuffs industry, mining, the chemical and petrochemical industries, gas, water and electricity works etc.

Guides, springs, brake lining bolts, exhaust bolts, connecting components, spark plugs, battery terminals, aggregates and central heating boilers for installation, maintenance and repair work.

Packaging:
Art.-No. MCO.D500 unit 10 tin á 500 g

MD ACRYL-TAPE

is an extremely strong double-sided adhesive tape. For durable adhesion, mounting and securing in interior and exterior areas. Transparent. Attaches securely and durably to almost all smooth surfaces such as metal, ceramic and glazed tiles, plastics, glass and wood. Ideal for mounting brackets, plates, hooks, storage elements, etc. Does not damage surfaces. Moisture-resistant.

Areas of use: Metal, wood, glass, plastic, ceramic, rubber and paper.

Application/instructions for use:
Object and application surface must be clean, dry, free of dust and grease. Be sure to avoid contact with the adhesive surface because this will prevent attainment of the full adhesive effect. Apply adhesive tape to the object. Pull off protective paper, apply object precisely to the desired surface and press firmly into place. Once pressed and adhered in place, object positioning cannot be corrected. Maximum adhesion is achieved after approx. 24 hours. Min. application temperature +10 °C. 2 cm long strips of adhesive tape can be loaded with a max. 1.3 kg depending on the application conditions (e.g. the application surface characteristics). Not suitable for: PE, PP, PTFE (e.g. Teflon®), silicone, paper/vinyl wallpapers, application surfaces with insufficient bearing strength and surfaces with dirt-resistant coatings. Shelf life of 1 year when stored in a dry, clean and well-ventilated place at +10°C to +30°C.

Packaging: MAT.R1,5-BK unit 14 roles of 1.5 m/blister card

MD MULTI-TAPE

is a self-welding tape consisting of PIB (polyisobutylene) and rubber. Welds immediately under tension to an airless, homogenous insulation without temperature and pressure.

MD MULTI-TAPE is non-sticky and easy to handle and apply

• clean removal after cutting open
• for insulating and impregnating electrical components
• protects metal pipes against corrosion
• excellent water and ozone resistance

Areas of application:
Connections, splicings, repairs to a large range of rotary current and distribution cables up to 46 kV. Insulation, impregnation of electrical components, anti-corrosion covering for e.g. metal pipes.

With MD MULTI-TAPE, even rotary current cables up to 46 kV. can be insulated with ease.

Packaging:
Art.-No. MTR.R5 unit 10 roles á 5 m | Art.-No. MTR.R5-BK unit 14 roles á 5 m/blister card

MD Silicone Tape

is a self amalgamating, insulating tape material, which forms a permanent, waterproof, UV-resistant and airtight seal when cured. This easy-to-use flexible tape stretches around uneven shapes and forms an can be used for automotive, marine, electrical plumbing, sealing, insulating and general purpose application.

Applications:

• Automotive, marine, electrical plumbing, insulating and general purpose application
• To do waterproof seals
• Do not use on gas pipes or connections
• Water hose and pipe repair, weatherproofing electrical connections, bundling wires, plumbing reparations etc.
• Can be used for electrical applications due to its excellent insulation properties
• Compatible with a wide range of substrates

Instructions:
The optimal processing temperature is between 0°C und +30°C.This tape can be applied in wet, non-oily conditions, although dry surfaces conditions are suggested for best performance. Hold the tape in position and apply a complete wrap back onto itself. This initial wrap secures the tape for additional wraps. Maintain a constant stretch as you continue to wrap, making sure each new layer “half laps” onto the previous layer. The overlaps will fuse together. The end of the final wrap must be pressed down onto prior wraps, using less stretch. For pressure applications stretch to the maximum and apply several tight layers. The layers from MD-Silicone Tape begin to vulcanize immediately forming a permanent, cohesive bond within 24 hours. Repositioning is not recommended after 2 minutes of wrapping.

Packaging:
Art.-No. MST.T.R.1.8 unit 10 roles á 0,5 x 180 cm/blister card